Blog

GTA 6 Gaming Setup Guide: Build a More Comfortable Space for Vice City

GTA 6 Gaming Setup Guide: Build a More Comfortable Space for Vice City
HBADA EUROPE / THE GAMING ROOM EDIT GTA 6 SETUP GUIDE
A NEW CITY. A FRESH LOOK AT YOUR SETUP.

Vice City
on the screen.
Comfort at home.

Before you settle into GTA 6, give your real-world gaming space a little attention. A controller-friendly chair setup can make your desk feel ready for the evening.

CONSOLE AT A DESK THE CHAIR COMES INTO FOCUS
THE SETUP QUESTION

The game gets the attention. Your elbows get the desk edge. If that sounds familiar, start your GTA 6 gaming setup with the position you actually play in. Holding a controller changes where your arms rest, and a console connected to a desk monitor may need a different seating arrangement from a keyboard setup. At HBADA, we would start with the chair and build outwards.

Set the chair with the controller in your hands.

Sit back, pick up your controller and let your elbows settle naturally. Then adjust the armrests. If you are lifting your shoulders to reach them, bring the supports down. If your arms hang without support, try a little more height.

Keep enough room for your hands to move freely. Armrests that feel fine for typing may sit too far forward or too wide when you hold a controller. Make these changes in your playing position.

Our E3 Pro 2026 gives you adjustable arm support alongside seat-depth and lumbar adjustments. Use those controls together so you can sit back while keeping the controller close.

Bring the screen into your comfortable view.

After changing the chair, check where the screen sits. You should be able to see the information you need without repeatedly reaching your head towards it or tilting your chin upwards.

For a desk monitor, start with the display directly in front of you and adjust its height and distance. If you play on a television, consider whether a slight recline gives you a comfortable view. Recheck your head position rather than assuming the deepest recline is the best one.

Try your setup with another controller-based game you already own. It is a useful way to notice an awkward screen position before you commit to the new arrangement.

Adjust for the way you play,
with the controller already in your hands.

Give your legs somewhere comfortable to go.

In an upright position, set the seat so your feet feel supported. Leave comfortable clearance behind your knees and enough space underneath the desk to change your leg position.

A pull-out leg rest can suit a reclined pause. For upright play at a desk, a separate floor footrest may be more useful if your feet do not reach the floor. Check that controller cables and charging leads stay clear of the chair’s wheels.

Borrow the sunset mood, keep the room usable.

A muted pink light against a dark blue wall can give your gaming corner a coastal evening feel. Keep decorative lighting outside your direct line of sight and check for reflections on the display.

Leave space around your console according to its manufacturer’s ventilation instructions. A clean shelf and a nearby controller charging spot make everyday use easier than a crowded display. Your chair also needs room to roll out and recline without meeting a cabinet behind it.

Which HBADA chair suits your gaming corner?

SHARED WORK + PLAY DESK

HBADA E3 Pro 2026

Consider the E3 Pro when the same desk handles work during the day and controller gaming later. Its three-zone lumbar support and adjustable seating let you change your setup between activities. Save your preferred positions as a short note if you switch frequently.

See E3 Pro 2026 adjustments ↗
A PLACE FOR SEATED BREAKS

HBADA E3 Ultra Gen 5

The E3 Ultra adds lower-back massage and graphene warmth to an adjustable ergonomic chair. Its reclining backrest and integrated footrest give you another way to settle back during a pause. Choose it for those comfort features, then check the dimensions against your desk and room.

Discover E3 Ultra Gen 5 ↗

Build a pause into the evening.

An adjustable chair gives you options, and movement still matters. Stand up between sessions, stretch your legs and look away from the screen. Set a reminder if you tend to lose track of time.

Massage and warmth can make a seated break feel relaxing. Give yourself time out of the chair too, especially when you notice you have stayed in one position for a while.

Your controller-ready setup check

Arms: Your shoulders feel relaxed while you hold the controller.
View: The screen is easy to see from your chosen seating position.
Space: Your legs and chair can move without catching cables.
Routine: You have a plan to stand up and take breaks.

A few questions before you rearrange the room.

Do I need a racing-style gaming chair for GTA 6?

The game does not require a particular chair style. For a desk-based setup, compare seat fit, armrest positioning and back support. An adjustable ergonomic office chair can work for controller gaming as well as your daily desk tasks.

Can I use an HBADA chair with a console and television?

Yes, provided the chair fits your room and gives you a comfortable view of the television. Check the screen position from the chair before deciding where to place it.

What should I measure before ordering?

Record your desk clearance and available floor space in centimetres. Compare these with the selected chair’s dimensions, leaving room for the recline and any extended leg rest.

Is this an official GTA 6 chair or collaboration?

No. This is an independent HBADA setup guide. The chairs featured here are HBADA products, with no GTA VI licensing or endorsement implied.

New game on your list?
Put your setup on it too.

Our European Black Friday sale is a chance to upgrade the chair you use for both work and play. Browse the current offers and choose your preferred configuration. Check availability and delivery to your country before completing your order.

Shop HBADA Europe Black Friday Deals ↗

Grand Theft Auto VI and related names are trademarks of their respective owners. HBADA is not affiliated with or endorsed by Rockstar Games or Take-Two Interactive. This article provides independent setup advice and does not review GTA VI gameplay.

Producto relevante

También te puede gustar

HBADA E3 Pro vs SIHOO C300: Which Lumbar Support Fits You? HBADA E3 Pro vs SIHOO C300: Which Lumbar Support Fits You? HBADA / The Fit Journal A closer look at lumbar support E3 Pro 2026 vs Doro C300 Where support becomes personal. A closer look at lower-back contact, the controls behind it and the seat beneath you. The three-zone idea 3 Central support with lateral wings. Conceptual diagram, not a product rendering. HBADA E3 Pro 2026 SIHOO Doro C300 Metric fit guide Both chairs offer adaptive lumbar support. The difference becomes clearer when you look at where the support sits and how much of that position you can personalise. Our E3 Pro 2026 combines independent lumbar placement with side wings that change the contour around your waist. What makes E3 Pro worth a closer look? If you want to refine lower-back contact separately from backrest height, E3 Pro gives you that flexibility. Its sliding seat adds another way to keep your back supported while finding comfortable knee clearance. The standard Doro C300 centres its lumbar design on self-adaptive contact within a flexible backrest. Published by HBADA. This guide compares selected published features, not results from an independent head-to-head test. C300 refers to the standard Doro C300, excluding the C300 Pro and C300 Pro V2. Regional specifications and configurations can differ. SIHOO and Doro C300 are trademarks of their respective owner. No affiliation or endorsement is implied. 01 Models 02 Contact shape 03 Lumbar design 04 Controls 05 Seat fit 06 Comparison 07 Choosing 08 Fit check 09 Questions 01 / The exact versions Compare the chair you would receive. This guide focuses on the HBADA E3 Pro 2026 Edition available through our European store and the standard SIHOO Doro C300 design. Keep newer C300 Pro models separate when collecting specifications. Check the selected E3 Pro configuration too, including armrests and footrest availability. A shared family name does not guarantee identical mechanisms. For European orders, confirm the details offered in your delivery country. This comparison does not carry over US prices, return offers or warranty promises. 02 / Contact shape A good fit starts where the backrest meets you. Lumbar support contacts the inward curve of your lower back. Height determines where that contact happens. The forward contour influences how firmly you feel it, while the width affects the contact around your waist. A prominent support can feel misplaced if it meets you too low. You may also move away from a backrest because the seat reaches too far towards your knees. That is why lumbar fit deserves a whole-chair check. Two different adjustments Raising the backrest moves its overall contact position. An independent lumbar lift lets you reposition the lower-back section separately. Check which control you are using. Start with comfortable contact. Refine the position from there. 03 / Central support and side wings Inside our three-zone approach. E3 Pro combines a central lumbar section with lateral wings. Personal adjustment establishes the starting fit, while the responsive mechanism accommodates movement. A Place the central support. The lumbar section has 60 mm of independent height adjustment. Move it gradually until it meets your lower-back curve comfortably. The highest setting is not automatically the right one. B Adjust the side contour. Rotating wings change the contact around your waist. Open or close them until the support feels natural, without concentrated pressure at the edges. C Check the response as you move. The lumbar system includes gliding movement and elastic tracking. After setting the chair, move between your working position and a small recline. Notice whether the contact stays comfortable. A listed dynamic travel distance describes movement within a mechanism. It should not automatically be read as a manually lockable adjustment range. Follow the controls shown for your exact chair. 04 / Adjustment controls Give each adjustment a purpose. 60 mm Independent lumbar lift 80 mm Backrest lift 50 mm Seat-depth travel These separate controls help you revisit one area without treating the whole backrest as a single fixed contact point. Set the seat first, then refine the backrest and lumbar position. Our current EU E3 Pro page describes a 6D armrest mechanism. Confirm the configuration you select. The standard C300 is described with coordinated armrests and an adjustable headrest, although regional versions should be checked individually. Direction counts are manufacturer terminology. At your desk, the useful question is whether the arm pads reach your forearms and allow comfortable access to the keyboard. Measure the space beneath the desktop before assuming the chair will slide underneath it. 05 / Seat fit Your knees can change the lumbar conversation. A seat that extends too far forwards can encourage you to perch away from the backrest. That changes the support you feel at your waist. A shorter usable seat can create a different problem if you want more thigh contact. E3 Pro provides 50 mm of seat-depth travel. Sit back, keep your feet supported and adjust for comfortable clearance behind your knees. Recheck the lumbar position after moving the seat. Read C300 measurements carefully. Published C300 listings vary in their seat-depth figures and descriptions. A single measurement does not establish that every version has a fixed seat. Confirm whether the exact configuration has a slider and ask for its usable adjustment range. Our E3 Pro dimensions and configuration information can help you compare the chair with your own measurements. A recommended body-height range is a starting point, since leg and torso proportions vary. 06 / The comparison What to look at, side by side. Selected design features. Confirm the exact regional version before ordering. Fit question HBADA E3 Pro 2026 SIHOO Doro C300 How is lumbar contact shaped? Central support with rotating lateral wings Self-adaptive lumbar support within a flexible backrest Can lumbar height be set independently? 60 mm independent lumbar lift Check independent lumbar controls separately from backrest adjustment Does the backrest adjust? 80 mm backrest lift Backrest height adjustment is described in published listings; confirm the regional range What about seat depth? 50 mm adjustment travel Published descriptions vary; verify the slider and range for the chosen version How should I compare armrests? Check the selected mechanism against your desk and tasks Check coordinated movement and the available adjustment directions What deserves a fit test? Lumbar placement, wing contact and knee clearance Adaptive contact after setting the backrest and seat This is a feature comparison, not a comfort score. Prices and policy comparisons are excluded because they depend on location, configuration and purchase date. Adjustment labels are not standardised independent ratings. 07 / Choosing your approach Why we focus on independent placement. Your shoulders may feel well supported before the lumbar section is in the right place. An independent lumbar lift gives you a control to revisit that lower contact without moving the entire backrest. The rotating wings let you refine the contour around your waist. Seat-depth movement then helps maintain that contact while making room behind your knees. This is the practical reason to look closely at E3 Pro when personal fit is high on your list. The C300 comparison highlights another important point: adaptive movement and adjustable starting position describe different aspects of a chair. Check both when deciding how much control you want. 08 / Before you order A fit check you can actually use. Begin with foot support. Set your seat height before judging the backrest. Your desk may require a separate footrest if raising the chair leaves your feet unsupported. Sit fully back and check the space behind your knees. Refine seat depth where the mechanism allows. Locate the lumbar contact. You should not need to brace against it or repeatedly slide forwards to feel comfortable. Place your hands on your actual keyboard or controller. Check forearm support and under-desk clearance. Move through your usual working positions. Revisit the settings if a slight recline changes the contact uncomfortably. Confirm the configuration and read the purchase terms for your delivery country before checkout. Recheck your setup after using the chair for a while. Small adjustments can be easier to judge once you are doing your normal tasks. Regular movement and breaks remain part of the routine. 09 / Questions answered The details behind the comparison. What is the main E3 Pro vs C300 lumbar-support difference? Our E3 Pro combines independent central lumbar placement with rotating side wings and responsive movement. The standard C300 centres its design on self-adaptive lumbar contact within a flexible backrest. Compare the exact controls as well as the support shape. Does backrest height adjustment replace a lumbar lift? Raising the backrest moves its overall contact position. An independent lumbar lift adjusts the lower-back section separately. They offer different ways to refine fit. Is every Doro C300 seat fixed? That conclusion should not be applied across all versions. Published measurements and descriptions differ. Check the seat mechanism and usable range for the exact regional configuration you are considering. Will a three-zone design suit every waist shape? Fit varies with body proportions and preferred contact. Adjust the wings gradually and check for comfortable, even support. A feature count cannot guarantee the same sensation for every person. Can these lumbar features treat a back condition? They are seating features designed to support a comfortable fit, not treatments for a medical condition. Persistent or worsening pain needs advice from a qualified healthcare professional. Find your starting position Make the support your own. If you want independent lumbar placement and a contour you can personalise, take a closer look at E3 Pro 2026. Compare the available configuration with your measurements and the space beneath your desk. Discover E3 Pro 2026 → Keep good chair advice close. Add HBADA as a preferred source on Google for practical fitting guides and chair comparisons. Add HBADA to your preferred sources ↗ Opens Google in a new tab. Confirm your selection there if HBADA is available. How to Stack HBADA Black Friday Deals for Bigger Savings - All The Things You Need to Know How to Stack HBADA Black Friday Deals for Bigger Savings - All The Things You Need to Know HBADA EUROPE / THE BLACK FRIDAY EDIT YOUR SAVINGS, ITEMISED A great chair.An even better receipt. Make our Black Friday offer go further. With an eligible code and the advertised discounted gift-card offers, this E3 Ultra example comes to €724 in combined spending. E3 ULTRA / GEN 5 / MASSAGE + HEAT HBADA BLACK FRIDAY SAVINGS RECEIPT E3 Ultra Gen 5 with Footrest Regular price €1,099.00 Black Friday price €809.00 Code: BF50 −€50.00 Chair subtotal €759.00 Buy €500 gift credit €470.00 Buy €100 gift credit €95.00 Total card purchase cost €565.00 Redeem €600 against €759 −€600.00 Remaining chair payment €159.00 ILLUSTRATIVE COMBINED SPEND €724 €375 below the €1,099 regular price €565 for gift cards + €159 remaining chair payment. Requires the €809 chair, BF50 eligibility and both discounted card offers to be available and honoured. Confirm card purchase prices before paying. Destination-specific charges, if any, are additional. Here’s how to get there. 01 Start with your chair Select the eligible E3 Ultra Gen 5 at €809. Apply BF50 to reach a €759 chair subtotal. 02 Check the gift-card offers Choose the €500 card and €100 card. Proceed only if their combined purchase price is €565. 03 Redeem both codes Once the cards arrive by email, apply their €600 balance to the eligible chair order. Pay the remaining €159. Gift-card credit and coupons work differently. Multiple gift cards can pay towards one order alongside an eligible discount code. BF50 cannot be combined with another promotional discount code. The example includes the original cost of buying the cards; their €600 face value is not treated as a €600 saving. Discounted cards are subject to availability. If they are unavailable or the advertised reduction does not appear before payment, the €724 example does not apply. Check the chair’s dispatch estimate before purchasing gift credit. And yes, the extras count too. E3 Ultra Gen 5 An extra 6 months of warranty with the eligible Black Friday offer. X7 in Black or Grey A €50 promotional gift card with a qualifying purchase. Valid for 90 days from issue. Daily early birds A complimentary cup for the first 3 eligible orders each day, with separate dispatch. HBADA Rewards Earn double points on eligible event purchases. Sign in before checkout. Model eligibility and promotion terms apply. The X7 promotional card is a separate benefit and is not deducted from this E3 Ultra example. Check the live sale page for benefit dates and gift dispatch details. Shop HBADA Europe Black Friday Deals ↗ Review the selected configuration, card purchase costs and final checkout total before completing payment. Keep our next shopping guide close. Add HBADA Europe to your preferred sources ↗ Buying a Home Office Chair This Black Friday? Check These 7 Things Buying a Home Office Chair This Black Friday? Check These 7 Things HBADA / THE HOME OFFICE EDIT THE BLACK FRIDAY CHECKLIST A LITTLE MEASURING GOES A LONG WAY Your space.Your chair.A better fit. Buying a home office chair this Black Friday? Seven practical checks will help you choose an HBADA chair that works with your body and your desk. HBADA E3 AIR / 2026 EDITION 7 A home office chair has to work in a real room. Your desk may have a drawer underneath, the wall may be closer than it looks, and your legs need space to settle. Keep a tape measure nearby as you browse our Black Friday offers. These checks connect the dimensions on the product page with the way you actually sit. The quick answer: seven things to check 01 / Seat height 02 / Usable seat depth 03 / Seat width 04 / Armrest clearance 05 / Lumbar adjustment 06 / Available floor space 07 / Purchase terms Your final buying checklist ↗ 01 SEAT HEIGHT Start where your feet land. Wearing your usual footwear, sit on a firm surface with your feet flat. Measure from the floor to the crease behind your knee and record the result in centimetres. Use this as a starting point when comparing the chair’s seat-height range. In your working position, your feet should feel supported and the seat edge should sit comfortably beneath your thighs. Your desk height also matters, especially if you need to raise the chair to reach the keyboard. For your HBADA shortlist: Compare the seat-height ranges on the E3 Air 2026 and E3 Pro 2026 pages. For upright desk work, a separate under-desk footrest can help when your feet need support. The chair’s pull-out leg rest is intended for reclined breaks. 02 USABLE SEAT DEPTH Leave a gap behind your knees. Sit back against the backrest. There should be a small, comfortable gap between the seat’s front edge and the backs of your knees. A seat that extends too far forward can make you slide away from the lumbar support. Measure from the back of your buttocks to the crease behind your knee, then allow for that clearance when comparing usable seat depth. Both the E3 Air and E3 Pro 2026 offer seat-depth adjustment. Compare the adjustment range in centimetres with your own measurement so you can sit back with your legs comfortably supported. 03 SEAT WIDTH Measure the space you sit in. Measure across your hips while seated, allowing room for clothing and small changes in position. Compare this with both the usable seat width and the space between the armrests. The chair’s overall width includes its frame and armrests. Use that measurement for room planning, while keeping the actual sitting space as a separate fit check. If a dimension is unclear, contact our team at service@hbada.eu with the exact model and configuration. The most useful measurement is the one you take at your own desk. 04 ARMREST CLEARANCE Look underneath the desktop. Measure from the floor to the lowest obstruction under your desk. A drawer, apron or support rail can reduce clearance even when the top of the desk looks high enough. Check the armrest height at a seat setting that fits you. Lowering the entire chair simply to tuck it away may change your working position. During use, bring the keyboard close enough that your shoulders can relax. Before ordering an E3 Pro 2026 or E3 Air 2026, compare the armrest dimensions with your desk’s underside. Desktop height alone cannot confirm clearance. 05 LUMBAR ADJUSTMENT Find support that meets your lower back. Sit back and adjust the lumbar support towards the curve of your lower back. It should feel comfortably supportive without pushing you towards the front of the seat. Begin with a gentle setting, then change one adjustment at a time. Shift position and try the recline. Notice whether the contact remains comfortable as you move between activities. Our E3 Pro 2026 and E3 Air 2026 bring three-zone lumbar support into your shortlist. Compare the adjustment controls alongside seat fit to decide which setup suits your workspace. 06 AVAILABLE FLOOR SPACE Give the recline some room. Measure behind the desk as well as beneath it. The chair needs space to roll out, turn and lean back. An extended leg rest also takes up space in front. Check nearby doors, bed frames and rug edges. Mark the planned chair area with removable tape if it helps you picture the setup. In a compact home office, comfortable upright access may matter more than using the deepest recline. Keep your measurements in centimetres when comparing the selected model’s dimensions. Allow extra clearance for movement, especially when your desk shares a bedroom or living room. 07 PURCHASE TERMS Make the offer work for your order. Confirm the colour and footrest configuration before comparing prices. Select your delivery country and check the estimate for your address, including any preorder information. Read our return and refund policy for eligibility, return costs and packaging requirements. Our warranty and service guide explains the applicable coverage. Check these details on the European store where you place your order. Your measurements are ready. Here are the deals. E3 Air 2026, grey, without footrest €359 E3 Air 2026, black, without footrest €359 E3 Pro 2026, grey, with footrest €509 E3 Pro 2026, black, with footrest €509 Listed EU Black Friday prices checked 18 November 2026, before additional eligible coupon discounts. Prices, delivery availability and offers may vary by destination and configuration. Confirm the final total at checkout and see our Black Friday page for current promotion terms. Review the coupon threshold and combination rules for your chosen offer. If more than one coupon is available, compare the eligible final totals before completing your purchase. Eight boxes before you buy. Use this final pass while you compare your preferred HBADA chair with your home setup. I measured my seated knee height in my usual shoes. I checked usable seat depth and clearance behind my knees. I compared seat width and the space between the armrests. I measured the underside of my desk, including drawers. I reviewed the lumbar adjustment controls. I allowed room to move and recline. I selected the right colour and footrest configuration. I checked delivery to my country, return terms and warranty coverage. This is a personal checklist. Your selections are not submitted and may reset when you reload the page. Before you click buy. What should I check when buying an office chair for a small space? Compare overall width and base size with your available floor space. Leave room to roll away from the desk, and account for the backrest and leg rest when reclined. A chair can fit beneath a desk yet still need more room to use. Can I choose an office chair using my height alone? Height is a useful starting point. Your leg proportions and desk clearance also affect fit, so compare seat height and usable seat depth with your own measurements. Which measurement matters for a low desk? Measure floor-to-underside clearance at the lowest obstruction. Compare it with the armrests at your intended working seat height, allowing a little space for movement.